Waveshare 3.5 inch fbtft display modules configure

From NAT, 7 Years ago, written in Plain Text, viewed 1'470 times.
URL https://code.nat.moe/view/44da6c2a Embed
Download Paste or View Raw
  1. # /etc/modules: kernel modules to load at boot time.
  2. #
  3. # This file contains the names of kernel modules that should be loaded
  4. # at boot time, one per line. Lines beginning with "#" are ignored.
  5. # Parameters can be specified after the module name.
  7. snd-bcm2835
  8. i2c-bcm2708  
  9. i2c-dev
  10. flexfb  width=320  height=480  regwidth=16 init=-1,0xb0,0x0,-1,0x11,-2,250,-1,0x3A,0x55,-1,0xC2,0x44,-1,0xC5,0x00,0x00,0x00,0x00,-1,0xE0,0x0F,0x1F,0x1C,0x0C,0x0F,0x08,0x48,0x98,0x37,0x0A,0x13,0x04,0x11,0x0D,0x00,-1,0xE1,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0xE2,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0x36,0x28,-1,0x11,-1,0x29,-3
  11. fbtft_device debug=3 rotate=90 name=flexfb speed=16000000 gpios=reset:25,dc:24
  12. ads7846_device model=7846 cs=1 gpio_pendown=17  keep_vref_on=1 swap_xy=0 pressure_max=255 x_plate_ohms=60 x_min=200 x_max=3900 y_min=200 y_max=3900

Replies to Waveshare 3.5 inch fbtft display modules configure rss

Title Name Language When
Waveshare 3.5 inch fbtft kernel cfg for BPi NAT text 7 Years ago.

Reply to "Waveshare 3.5 inch fbtft display modules configure"

Here you can reply to the paste above