Re: Waveshare 3.5 inch fbtft kernel cfg for BPi

From Innocent Pig, 5 Months ago, written in Plain Text, viewed 71 times. This paste is a reply to Waveshare 3.5 inch fbtft kernel cfg for BPi from NAT - go back
URL https://code.nat.moe/view/a8ca77de/diff Embed
Viewing differences between Waveshare 3.5 inch fbtft kernel cfg for BPi and Re: Waveshare 3.5 inch fbtft kernel cfg for BPi
# /etc/modules: kernel modules to load at boot time.
#
time.
#
# This file contains the names of kernel modules that should be loaded
loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
ignored.
# Parameters can be specified after the module name.

snd-bcm2835
i2c-bcm2708  
i2c-dev
spi-sun7i
name.

snd-bcm2835
i2c-bcm2708  
i2c-dev
spi-sun7i
flexfb  width=320  height=480  regwidth=16 init=-1,0xb0,0x0,-1,0x11,-2,250,-1,0x3A,0x55,-1,0xC2,0x44,-1,0xC5,0x00,0x00,0x00,0x00,-1,0xE0,0x0F,0x1F,0x1C,0x0C,0x0F,0x08,0x48,0x98,0x37,0x0A,0x13,0x04,0x11,0x0D,0x00,-1,0xE1,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0xE2,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0x36,0x28,-1,0x11,-1,0x29,-3
init=-1,0xb0,0x0,-1,0x11,-2,250,-1,0x3A,0x55,-1,0xC2,0x44,-1,0xC5,0x00,0x00,0x00,0x00,-1,0xE0,0x0F,0x1F,0x1C,0x0C,0x0F,0x08,0x48,0x98,0x37,0x0A,0x13,0x04,0x11,0x0D,0x00,-1,0xE1,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0xE2,0x0F,0x32,0x2E,0x0B,0x0D,0x05,0x47,0x75,0x37,0x06,0x10,0x03,0x24,0x20,0x00,-1,0x36,0x28,-1,0x11,-1,0x29,-3
fbtft_device debug=3 rotate=90 name=flexfb speed=16000000 gpios=reset:25,dc:24
gpios=reset:25,dc:24
ads7846_device model=7846 cs=1 gpio_pendown=17  keep_vref_on=1 swap_xy=0 pressure_max=255 x_plate_ohms=60 x_min=200 x_max=3900 y_min=200 y_max=3900

Reply to "Re: Waveshare 3.5 inch fbtft kernel cfg for BPi"

Here you can reply to the paste above

captcha